SOFTWARE ON THIS PAGE IS PROVIDED TO YOU "AS IS," AND I MAKE NO EXPRESS OR IMPLIED WARRANTIES WHATSOEVER WITH RESPECT TO ITS FUNCTIONALITY, OPERABILITY, OR USE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR INFRINGEMENT. WE EXPRESSLY DISCLAIM ANY LIABILITY WHATSOEVER FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST REVENUES, LOST PROFITS, LOSSES RESULTING FROM BUSINESS INTERRUPTION OR LOSS OF DATA, REGARDLESS OF THE FORM OF ACTION OR LEGAL THEORY UNDER WHICH THE LIABILITY MAY BE ASSERTED, EVEN IF ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES.
This page contains the download links to the latest projects.
DCIPLC is actually a program that replaces the CPU module of a PLC, and within which control
programs can be developed and modified.With the aid of a serial interface cable and some hardware,
the states of 32 inputs can be monitored and 32 outputs can be driven. The program runs under the Windows.
The minimum system requirement is a 100-MHz Pentium processor. The installed software takes up approximately 3 MB,
including the examples.
The backbone of the system is a complete serial bus that uses its own protocol. Data is sent to and
received from a maximum of 64 terminals over long distances using an RS485 interface.
The hardware of the system consists of a simple RS232 to RS485 converter and a microprocessor driven
terminal. Of the latter you will obviously need to build as many as are required. The software consists
of a program for the PC and one for the 'terminal processor'.
The terminal processor is also sold ready programmed.
Download DCIBUS version2.
The PLµX Project is an effort to produce an Embedded Linux-based Programmable Logic Controller (PLC).
With GNUBLIN (embedded GNU / Linux board) and the aid of eight PCA9555 Port-Expanders the states of 64
inputs can be monitored and 64 outputs can be driven.
Download The PLµX software(2014-02) for the GNUBLIN Board.
The PLµX Ladder Diagram Editor is designed to allow you to easily prepare a PLC program by simply placing blocks. Ladder logic diagrams, which are in many ways similar to relay logic diagrams, are frequently used to graphically generate programs.
Download The Ladder Diagram Editor(2014-05). Project builded with Java jdk 1.7!
Download Online help files(2013-12).
Download Ladder diagram samples.
Download PCB and schematic.